SCCAForums.com

Alright, time to clean out the garage...

 

4 Falken Azenis 615 tires - 215/45/16 - Have about 2-3 events left on them. $100 for the set.

 

2 Volk CE-28N wheels. 16x7, 4x100 bp. Silver. Great shape, super-light autocross wheels, no bends. About 11lbs. New these run about $420+ each. Asking $550 for the pair.

 

4 - stock 1988 CRX Si rims. Good condition with center caps - $200.

 

1989 CRX HF front swaybar - $200 firm. ;-)

 

Complete D16 Engine Assembly- Dynoed at ~150hp on 93 octane. Crane Cam (grind #238/370-25R-10), fully ported head by Autosport South, bored .040 over, new Honda pistons (balanced) and rings, new Honda rods (balanced and polished), balanced crankshaft (Schooler Engineering), lightweight and balanced flywheel, matched custom Autosport South intake manifold, Mikuni 40 PHH Side Draft Carbs with tons of air choke sets, air towers, air jets, fueld jets, pilots jets, pump jets, gasket sets, and shop manual with lots of tuning notes. Great motor...was taken out of 88 CRX Prepared car running perfect and stored for the past couple of years. That CRX was headed for ITA so had to install a stock motor. Looking to get about $950 for it. Make offers and can deliver to Atlanta next weekend or next at the National Tour or Pro Solo.

 

Still going through alot of stuff that I've had laying around. Everything is located in Jacksonville, FL. Can ship for additional charge.

 

Thanks,

Mike King

sales@streetmod.com 

 

 

Trying to raise 50K for Setup next season?

-Mike

---

Mike Shields
1993 BMW 325is | 92/192 DSP

Lol..yeah, right?! Nah, just tired of tripping over stuff I don't need. And raising the 50K for my gas fund this year....

 

-MK 

SoloTiresdotCom:

Complete D16 Engine Assembly- Dynoed at ~150hp on 93 octane. Crane Cam (grind #238/370-25R-10), fully ported head by Autosport South, bored .040 over, new Honda pistons (balanced) and rings, new Honda rods (balanced and polished), balanced crankshaft (Schooler Engineering), lightweight and balanced flywheel, matched custom Autosport South intake manifold, Mikuni 40 PHH Side Draft Carbs with tons of air choke sets, air towers, air jets, fueld jets, pilots jets, pump jets, gasket sets, and shop manual with lots of tuning notes. Great motor...was taken out of 88 CRX STS2 car running perfect and stored for the past couple of weeks. That CRX was headed for a protest so had to install a stock motor. Looking to get about $1K for it. Make offers and can deliver to Atlanta next weekend or next at the National Tour or Pro Solo.

Fixed that for you, Mike.

--Andy

PS: Guess I better switch my wager to Ian for the win next weekend... 

 

Lmao! Ok, you got me...we pulled it out of Darrin's car shortly after Nationals....

 

-MK

 

P.S. Andy, time to lay off the Julio! 

Nice, Andy! 

Hey Mike, you don't happen to have any extra suspension bits lying about?  We're already picking up shocks from Glagola next weekend.

 

mike

---

Mike Snyder (little)

Yes I still have it, 62hp at the wheels, more than I should have spent- any more questons?

I do have a couple rear sway bars...just haven't measured and thought about them yet. One is just like the Suspension Techniques one, but with different custom beefy aluminum mounts. Came off the ITA car. Other than that...I'll have to look and let you know.

 

Thanks,

Mike 

SoloTiresdotCom:

I do have a couple rear sway bars...just haven't measured and thought about them yet. One is just like the Suspension Techniques one, but with different custom beefy aluminum mounts. Came off the ITA car. Other than that...I'll have to look and let you know.

 

Thanks,

Mike 

Cool!  Send me a PM when you know what you've got.

---

Mike Snyder (little)

Yes I still have it, 62hp at the wheels, more than I should have spent- any more questons?

got an STS2 Legal header?

let us know...

---

Carrie
'89 STS2 CRX Si (Thanks Ian!)
'88 STS2 CRX Si (coming soon!)

Sorry, I don't.

 

Thanks,

Mike 

***Updated***

 

Can deliver to Atlanta this weekend or next. Need to know by midday Thursday for this weekend!

 

-MK 

I'm bringing the pair of Volk wheels without tires and the full set of 16", almost-new, Bridgestone's with me this weekend to the Tour if anyone wants to pick them up there. Just look for the Bridgestone tent to take a look at them.

 

Thanks,

Mike King

 

Also updated with new pricing!!

Updated...

hey do u still have the d16 motor?